Pink Bunny Body
Step
1
Create a New document, then make a 190 x 290px tall rectangle with the Rectangle
Tool (M).
Step
2
With your Direct Selection Tool
(A), select the top left corner of the rectangle. With the point selected, the Control panel defaults to the Anchor
Point options. Press the second to the left button, converting the anchor
point to a smooth point.
Step
3
Repeat the previous step with the
top right anchor point.
Step
4
Fill the rectangle with a Linear
Gradient from the Gradient panel and change the first swatch to a
pink color and the second swatch to a darker pink color.
Step
5
Use the Gradient Tool (G) to
adjust the gradient by clicking and dragging from the middle of the shape to
the bottom.
Step
6
Copy (Command + C) the shape and Paste in Front (Command + F). With the
new shape selected, use the Selection Tool (V) and scale the shape to
half of its original size. After scaling, place the the copied shape towards the bottom of the original.
Step
7
Change the first swatch in the
gradient fill to a light pink and the other swatch to a slightly darker pink.
2.
Create the Legs
Step
1
With the Star
Tool, click on the artboard to bring up the Star
dialog. In the dialog change Radius 1
to 50px, Radius 2 to 25px and the Points to 3.
Step
2
With the triangle selected go Effect
> Stylize > Round Corners. In the dialog change the Radius to 15px.
Step
3
With the Selection Tool (V),
squish the triangle horizontally to half of its original size. Next rotate the
triangle 180 degrees.
Step
4
Fill the triangle with a Linear Gradient, make
the first swatch a dark pink from the previous shape and the second swatch make
a darker pink. Adjust the gradient so the darkest part of the gradient is at
the bottom of the triangle.
Step
5
Place the triangle at the bottom of
the bigger body shape creating a leg. Once placed, drag out a
copy of the leg to other side. Simply hold down Alt + Shift while
dragging the shape.
3.
Create the Bunny Ears
Step
1
Create a 200 x 50px tall
rectangle and round the corners at 25px.
Step
2
Go to Effect > Warp > Arch.
With the Warp Options dialog open, change the Bend to 20
and the Horizontal Distortion to -49. Next, make sure to expand
the effects by going to Object > Expand Appearance. If you don’t do this
you will get some unexpected results as the steps continue.
Step
3
Rotate the shape 45 degrees
to the right so the shape is vertical. Next, place the shape over the top of
the body shape. Once placed, Copy (Command + C) and Paste in Front
(Command + F) the ear shape. Reflect the shape vertically by going to Object
> Transform > Reflect and choosing the Vertical option in the
dialog. Once reflected, move the copied ear to the other side of the body.
Step
4
Change the fill of the the ears to the first swatch pink color in the body shape.
Step
5
Select the first ear and go to Object
> Path > Offset to open the Offset dialog. Change the Offset
to -15px. Next, move the offset slightly down and to the left.
Step
6
Change the fill of the offset to the
light Linear Gradient that was used in the belly shape of the body.
Step
7
Repeat the same step for the right
ear shape.
4.
Create the Arms
Step
1
Copy (Command + C) and Paste (Command + V) the main right ear shape. Rotate the copied shape 190 degrees and
scale it down to half of its original size. Fill the shape with the original
body gradient and place it behind the lower left side of the body.
Step
2
Copy (Command + C) and Paste in Front (Command + F) the arm shape,
reflect it vertically, then place it on the other side of the body.
5.
Create the Eyes
Step
1
Now that the body is done, we can
start adding a face to the bunny. Start by creating an
ellipse with the Ellipse Tool (L) that is 37 x 37px. Fill
the ellipse with a Radial Gradient with the first swatch a dark pink and
the second swatch the same pink as in the ears.
Step
2
Create another ellipse with the
previous one, but smaller, and fill it with a dark pink color. Next draw two
smaller white filled ellipses within the dark pink one. Now you have an eye!
Step
3
Place the eye shapes over the top
left part of the body shape. Once placed, Copy (Command + C) and Paste
(Command + V) the eye shapes and place them on the
other side of the body.
6.
Create the Nose
Create a triangle like before and
scale it down to half of its original size. Also like the other triangle, round
the corners and fill it with the same gradient. Next, place the triangle over
the middle part of the body below the eyes.
7.
Create the Mouth
Step
1
With the Line Segment Tool (\)
draw a dark pink (same as the dark pink eye color) 3pt line right below
the nose, spanning the distance of the eyes.
Step
2
Draw a
ellipse so the bottom fourth of it is the width of the line you just drew.
Next, draw a rectangle that encompasses the top half of the ellipse up to the
line you drew. Select the rectangle and ellipse and press the Subtract Shape
Areas button from the Pathfinder panel. While still in the Pathfinder
panel, press the Expand button.
Step
3
Fill the subtracted shape with the
same Linear Gradient as the body gradient, but adjust it so the darker
part of the gradient is at the top. Place the shape behind the line you created
before.
Step
4
Create a rectangle that is 38 x
40px tall. Like with the main body shape, select the bottom left anchor
point with the Direct Selection Tool (A) and change the anchor to a Smooth
Point. Do the same for the bottom right anchor point.
Step
5
Place the tooth shape behind and
below the mouth line on the left side of the nose shape. Fill the tooth with a Linear
Gradient with the first swatch white and the second swatch a light gray.
Adjust the gradient so the white is at the top of the tooth.
Step
6
Copy (Command + C) the tooth and Paste in Front (Command + F). Create
an ellipse the covers the bottom two-thirds of the tooth. Select the tooth copy
and the ellipse and Subtract the shapes. Once
subtracted, change the color of the shape to a light gray.
Step
7
Drag out a copy of the tooth shapes
to the left side.
8.
Create the Hair
Step
1
Now it is time to add some hair.
With the Pen Tool (P) draw a hair puff shape towards the top of the
body. Fill the shape with the same Linear Gradient as the nose shape.
Step
2
With the hair shape selected, Copy
(Command + C) and Paste in Back (Command + B). With the copy
selected, move it down slightly. Fill the copy with the same gradient as the
main body shape and adjust it so the darker part of the gradient is at the top
of the shape.
9.
Add a Carrot and the Finishing Touches
Step
1
The bunny character is done, but lets have some more fun to it.
Let’s make it look like the bunny just devoured a carrot! Use you Pencil
Tool (N) and draw twenty – twenty-five small ellipse like shapes over the
teeth and mouth area of the bunny (make these shapes a bit rough). Fill the
shapes with a Linear Gradient, set the first swatch to an orange color
and the second to a darker orange color.
Step
2
Draw an ellipse that is 45 x 30px
tall. Draw another ellipse over that one that is 65 x 30px tall. Place
the second ellipse so the bottom is in the center of the first one. Select both
ellipses, Intersect the Shape Areas from the Pathfinder
panel, and press Expand. Next, fill the shape with the orange linear
gradient you used for the small elements around the mouth, then
adjust the gradient so the lighter part of the gradient is at the top of the
shape.
Step
3
With the Pencil Tool (N),
create some little ellipse like shapes around and below the previous shape.
Fill these with the same orange gradient.
Step
4
Copy (Command + C) the original top ellipse shape and Paste in Front
(Command + F). Scale the shape down to half of its original size, then place it towards the top of the original shape. Change
the first swatch in the copied shape to a green color and the second swatch to
a darker green color.
Step
5
With the Pen Tool (P), draw a
couple stems coming out of the carrot top. Fill these shapes with the same
green gradient you just used.
Step
6
Create an ellipse that is 75 x
75px. Fill it with a Radial Gradient with the first swatch a light
brown color, the second swatch a white color, and set the ellipse to Multiply from the Transparency panel. Next,
squish the ellipse vertically to half its original size. Place the ellipse
behind all the carrot top artwork as a drop shadow.
Step
7
Create two more ellipses, as in the
previous step, then place them behind the feet. Create
another bigger ellipse, but make the brown color of the gradient lighter and
place in between the feet shadows.
Step
8
Create a rectangle the size of you
document and fill it with a Radial Gradient. Make the first swatch white
and the second swatch a light yellow color. All done!
That’s
All Folks!
Below is the final image we just
worked on.
